SWMM 5 Warning Messages

SWMM 5 Warning Messages

WARNING 01:

wet weather time step reduced to recording interval for Rain Gage xxx.

The wet weather time step was automatically reduced 

so that no period with rainfall would be skipped during a simulation.

WARNING 02:

maximum depth increased for Node xxx.

The maximum depth for the node was automatically increased to match 

the top of the highest connecting conduit.

WARNING 03:

negative offset ignored for Link xxx.

The link's stipulated offset was below the connecting node's invert 

so its actual offset was set to 0.

WARNING 04:

minimum elevation drop used for Conduit xxx.

The elevation drop between the end nodes of the conduit was below 

0.001 ft (0.00035 m) so the latter value was used instead to calculate its slope.

WARNING 05:

minimum slope used for Conduit xxx.

The conduit's computed slope was below the user-specified Minimum Conduit Slope 

so the latter value was used instead.

WARNING 06:

dry weather time step increased to wet weather time step.

The user-specified time step for computing runoff during dry weather periods 

was lower than that set for wet weather periods and was automatically 

increased to the wet weather value.

WARNING 07:

routing time step reduced to wet weather time step.

The user-specified time step for flow routing was larger than the wet weather

runoff time step and was automatically reduced to the runoff time step 

to prevent loss of accuracy.

WARNING 08:

elevation drop exceeds length for Conduit xxx.

The elevation drop across the ends of a conduit exceeds its length. 

The program computes the conduit's slope as the elevation drop divided 

by the length instead of using the more accurate right triangle method. 

The user should check for errors in the length and in both the invert elevations 

and offsets at the conduit's upstream and downstream nodes.

WARNING 09:

time series interval greater than recording interval for Rain Gage xxx.

The smallest time interval between entries in the precipitation time series used 

by the rain gage is greater than the recording time interval specified for the gage. 

If this was not actually intended then what appear to be continuous periods 

of rainfall in the time series will instead be read with time gaps in between them.

WARNING 10:

crest elevation is below downstream invert for regulator Link xxx.

The height of the opening on an orifice, weir, or outlet is below the invert elevation 

of its downstream node. 

Users should check to see if the regulator's offset height 

or the downstream node's invert elevation is in error.

WARNING 11:

non-matching attributes in Control Rule xxx.

A control rule's premise is comparing two different types 

of attributes to one another (for example, conduit flow and junction water depth).